Click here to phone an agent

Image result for visa card

Ruff N Tuff Tools
15411 W. Waddell Rd.
Suite 102
Surprise AZ 85379

  Home > Diamond Products Ltd ™ > CONCRETE SAW >

MK-4000 Series Electric Saws MK-4020B
167439-20 MK-4000 Series Electric Saws MK-4020B

MSRP: $25,610.55
Ruff N Tuff Tools Price: $24,330.02
SALE : $23,049.50

Product Code: 167439-20

Bulk item transport options

Freight Delivery Options*:
Commercial Delivery Address
Residential Delivery Address [Add $345.00]

The MK-4000 Electric Saw provides a solution for those environments and situations where electric power is the right choice, whether for indoor use or simply operator preference. The saw utilizes a three-phase, 30 hp, 460V electric motor. The saw features the same hydraulic raise/lower system, self-propelled transmission and control set as other MK-4000s. The saw has an on-board battery to provide 12VDC power for raise/lower function when the saw is not plugged in, and has a transformer/ battery charger to recharge the system automatically anytime the saw is connected to power. The saw can also be plugged into 120VAC to recharge or maintain the battery when the saw is not in use. An ammeter is provided to help monitor load when cutting. One-year limited warranty.
Part# 167439-20 MK-4020B 30Hp 460V 3 Phase with 20" guard

MK-4000 Series - 30 HP Electric Saws


Blade Guard

Part #













General Specifications

Horse Power

30 hp

Volts / Phase

460V / 3 Phase

Blade RPM - 20" Blade


Blade RPM - 26" Blade


Blade RPM - 30" Blade


Blade RPM - 36" Blade


Depth of Cut - 20" Blade


Depth of Cut - 26" Blade


Depth of Cut - 30" Blade


Depth of Cut - 36" Blade



IP 65 IEC across the line starter


1" with 3/8" Drive Pin

Travel Speed

0-200 FPM Forward
0-100 FPM Reverse

L x W x H

64" x 35" x 47"


1,250 lbs.

Quick release, auto-latching bayonet mount blade guard. Optional Meco Spade available to allow for use of old style Meco guards.

Removable blade shaft stub for easy maintenance. Totally enclosed and sealed blade shaft with continuous oil bath lubrication system.

Axle is designed for smooth transition in and out of cuts.

A differential lock provides positive drive to both rear wheels for maximum traction when cutting on slippery surfaces and free/engage controls to allow the saw to be pushed manually.

Eaton model 7 hydrostatic transmission coupled to an MK differentiating trans-axle provides continuous variable forward/ reverse travel and cutting motion.

Blade guard uses ride-on-the-blade water tubes for superior water delivery and blade cooling.

Warning IconWarning: This equipment contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. These chemicals are contained in various components. fluids and paint including but not limited to fuel, oil, electric motors and batteries. In addition, gasoline/diesel powered equipment emits engine exhaust and fumes, and when serviced, cleaned or maintained generate used oil, waste fluids, fumes, grease, grime and particulates from the component wear and silica dust which contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Diamond Products Ltd ™ > CONCRETE SAW
Husqvarna ™ > Husqvarna Walk Behind Saws
Husqvarna ™ > Husqvarna Walk Behind Saws > Self Propelled Walk Behind Saws
MK Diamond ™ > Concrete > Pro Concrete Saw
MK Diamond ™ > Concrete > Walk Behind Saws > CX-3E1 CONC SAW,LEESON 1.5HP
MK Diamond ™ > Concrete
MK Diamond ™ > Concrete > Walk Behind Saws
Husqvarna ™
Diamond Products Ltd ™
MK Diamond ™