MK-62GSPV 24"X.187X1"

These Epoxy filled diamond blades are manufactured with steel cores which have laser cut outs and a special expoy is injected into the center. This helps the blade to produce only 99dB(A). Laser Cut Cores have epoxy filled silencing material that provide limited noise reduction/suppression.

*Picture is used as reference only and actual blade design may vary.

24"X.187X1" (10mm segment height) Silent Core blade

Part# 160326






A reduction in dB(A) of 10 will reduce human noise perception by
approximately one half. Noise reduction depends on a number of factors.




Laser Cut Core Design
Cost effective laser cut core with epoxy filled silencing
material, provides limited noise reduction/suppression.



Sandwich Laminated Silent Core Design
Sandwich laminated steel cores with copper
center provide the greatest sound reduction.

Warning: This product can expose you to chemicals including nickel and crystalline silica, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.govancer. For more information go to www.P65Warnings.ca.gov