Click here to phone an agent




Image result for visa card



Ruff N Tuff Tools
15411 W. Waddell Rd.
Suite 102
Surprise AZ 85379
888-747-8593


You are here:Home > Parts & Accessories
Click below for more information :
Accessories
Parts & Accessories
Sort By:
Page of 1
Pullman-Holt B524263 Disposable Poly Bag for Hepa Vacuum Rubber toggle switch cover - rubber boot cover SCREW,HEX HD,1/2-20X1-1/4 IMPELLER, WATER PUMP
MSRP: $14.75
Ruff N Tuff Tools Price: $10.75
SALE $4.29 Buy 1 Get 1 Free!
more info
MSRP: $10.00
Ruff N Tuff Tools Price: $5.00

(2)
more info
MSRP: $8.99
Ruff N Tuff Tools Price: $7.50

(1)
more info
MSRP: $10.00
Ruff N Tuff Tools Price: $8.00

(1)
more info
B524263 Pullman-Holt Disposable Poly Bag 154301 Rubber toggle switch cover - rubber boot cover 152122, SCREW,HEX HD,1/2-20X1-1/4, MK-5000 blade screw 160085 IMPELLER, WATER PUMP
Pullman-Holt B524263 Disposable Poly Bag is now made by Husqvarna/Ermator. O.E.M equipment.
Part# B524263
(SALE) Buy 1 Get 1 FREE. Min. order 5 pieces.
Toggle switch, rubber boot cover. Fits MK-100 and MK-101 toggle switches.
Part# 154301
SCREW,HEX HD,1/2-20X1-1/4, MK-5000 blade screw
Part# 152122
IMPELLER, WATER PUMP
Part# 160085
KNOB, TRI PLASTIC MK-660 1-1/2 17218-ZE1-507 5X02 PRE FILTER BRUSH, CAP, MTR BX3-R SET OF 2 Trowel 1/4" x 1/4" x 1/4"
MSRP: $10.00
Ruff N Tuff Tools Price: $5.70
SALE : $9.50
more info
MSRP: $10.00
Ruff N Tuff Tools Price: $9.50
more info
MSRP: $11.20
Ruff N Tuff Tools Price: $9.75
more info
MSRP: $11.89
Price $9.99
more info
156770-02  KNOB, TRI PLASTIC MK-660 1-1/2 17218-ZE1-507 PRE FILTER 5X02 160947 BRUSH, CAP, MTR BX3-R SET OF 2 Superiorbilt Notched Trowel 1/4" x 1/4" x 1/4"
KNOB, TRI PLASTIC MK-660 1-1/2
Part# 156770-02
Honday Pre-Filter Foam element. Works with part# 17210-ZE-517
Order inner cartridge filter here.
Part# 17218-ZE1-507
BRUSH, CAP, MTR BX3-R SET OF 2. Fits BX-3 & BX-4 motor assembly with Ryobi (China) Motor
Part# 160947
Superiorbilt Valuseries Notched Trowel. 1/4" x 1/4" x 1/4"
Part# 85-T4-88
BRUSH,CAP,MTR,156428-R 2/SET Floor Scraper Blades 7-3/8" x 3" Vinyl Scraper Blade 133025-MK Drain Plugs (2-Pack) BEARING, BLD SHFT 880/101/1080
MSRP: $12.75
Ruff N Tuff Tools Price: $10.10
more info
MSRP: $14.70
Ruff N Tuff Tools Price: $13.97
more info
MSRP: $20.00
Ruff N Tuff Tools Price: $15.00
more info
MSRP: $15.25
Sale $15.00
more info
163932 BRUSH CAP MTR 156428-R 2/SET 167796 Floor Scraper Blade 7-3/8" x 3" Vinyl Scraper Blade 133025-MK Drain Plugs (2-Pack) $9.99 137711 BEARING, BLD SHFT 880/101/1080
BRUSH,CAP,MTR,156428-R 2/SET FITS MK-370, MK-470, MK-770, MK-770EXP MOTORS WITH RYOBI MOTOR
Part# 163932
Floor Scraper Blade 7-3/8" x 3" Vinyl Scraper Blade
Part# 167796
MK Drain Plugs (2-Pack)
Part# 133025-MK
BEARING, BLD SHFT 880/101/1080
Part# 137711
(also see available kit part# 137711-MK which includes two bearings, inner/outer flange and blade nut) - Fits saws with NO blade lock only. If you have a blade lock see part# 158222-MK
TX-3 Tubing TUBING, PVC,1/4 X 3/8 X 1300MM BRUSH,CARBON, FITS MTR 156428-R SET Floor Scraper Blades 10" Vinyl Scraper Blade BRUSH, MTR-1503S, MK-170, MK-270, MK-370, MK-470, MK-770
MSRP: $28.00
Ruff N Tuff Tools Price: $22.86
SALE : $15.85
more info
MSRP: $20.00
Ruff N Tuff Tools Price: $16.00

(1)
more info
MSRP: $25.00
Ruff N Tuff Tools Price: $20.53
SALE : $19.99

(1)
more info
MSRP: $25.00
Ruff N Tuff Tools Price: $20.00

(13)
more info
164692 TX-3 Tubing TUBING, PVC,1/4 X 3/8 X 1300MM 165479 BRUSH CARBON FITS MTR 156428-R SET 167619 Scraper Blade 10" 151774 O.E.M. CARBON BRUSH, MTR-1503S, 170, 270, 370, 470, 770
TUBING, PVC,1/4 X 3/8 X 1300MM Carbon brush set/2. Fits MK-370, MK-370EXP, MK-470, MK-770, MK-770EXP motors part# 156428-R with Ryobi motors.
(Sold in sets of 2)
Part# 165479
Floor Scraper Blade 10" Vinyl Scraper
Part# 167619
BRUSH, MTR-1503S, Fits: MK-170, MK-270, MK-370, MK-370EXP, MK-470, MK-770 & MK-770EXP, set (2) For motors made in Japan, China and Taiwan only.
Part# 151774
BRUSH, MTR BX3-R 2/SET 17210-ZE1-517 Honda Air Filter Standard & Cyclone models PULLEY 6J19 X 5/8 BORE WHEEL, ROLLER MK5000, MK1080
MSRP: $25.00
Ruff N Tuff Tools Price: $20.00
more info
MSRP: $25.00
Ruff N Tuff Tools Price: $20.00
more info
MSRP: $28.75
Ruff N Tuff Tools Price: $22.00
more info
MSRP: $25.00
Ruff N Tuff Tools Price: $22.00
more info
160918 Carbon BRUSH, MTR BX3-R 2/SET 2004-0808 17210-ZE1-517 Honda Air Filter Standard & Cyclone models 158199 PULLEY, 6J19 X 5/8 BORE 152493 WHEEL, ROLLER MK5000, MK1080 (Hardware sold separately)
CARBON BRUSH, MTR BX3-R 2/SET 2004-08
Part# 160918
17210-ZE1-517 Honda Air Filter 5B02. Genuine O.E.M Honda Part. Air Filter. 5B02
Fits GX100, GX140, GX160, GX200 Honda standard and cyclone engines.
Part# 17210-ZE1-517
PULLEY, 6J19 X 5/8 BORE MK-101 Micro-V Pulley
Part# 158199
152493 WHEEL, ROLLER MK5000, MK1080 (Hardware sold separately)
Part# 152493
BRUSH,CAP,MTR,156428-R 2/SET SWITCH,TOGGLE,20A/DPST/QC SWITCH,TOGGLE,20A/DPST/QC Dressing Stone
MSRP: $25.00
Ruff N Tuff Tools Price: $22.50

(1)
more info
MSRP: $30.00
Sale Price $23.99

(3)
more info
MSRP: $30.00
Ruff N Tuff Tools Price: $24.99
more info
MSRP: $33.00
Sale $26.25

(1)
more info
154457 BRUSH CAP MTR 156428-S 2/SETT 154310 O.E.M SWITCH,TOGGLE,20A/DPST/QC 154310-S, SWITCH,TOGGLE,20A/DPST/QC 152792 Dressing Stone, 152792
BRUSH,CAP,MTR,156428-S 2/SET FITS MK-370, MK-470, MK-770, MK-770EXP MOTORS WITH SANKA MOTOR ONLY
Part# 154457
SWITCH,TOGGLE,20A/DPST/QC. O.E.M Switch. Don't be fooled by aftermarket look-a-likes.
This O.E.M switch Fits MK-100 & MK-101 tile saws with toggle switch.
Keep your MK saw original with MK parts. For rubber boot, see part# 154301
Part# 154310
SWITCH,TOGGLE,20A/DPST/QC, O.E.M Switch. Don't be fooled by aftermarket look-a-likes.
This O.E.M switch fits MK-100 & MK-101 saws. MK tiles saws with threaded terminals.
Keep your MK Saw original with MK parts.
RUBBER BOOT PART# 154301 SOLD SEPARATELY. CONNECTIONS HAVE SCREWS ON BACK.
Part# 154310-S
DRESSING STICK 8"X2"X1 -COMP
Typically ships and arrives in 2-4 business days.
Part# 152792
BELT 260J6 Micro V Belt for MK-101 series Tile Saw Small Rip Guide Side table, MK-370EXP & MK-770EXP Dual 45 Degree Flat Angle Guide O.E.M..
MSRP: $38.95
Ruff N Tuff Tools Price: $28.50
SALE : $26.25

(1)
more info
MSRP: $34.00
Ruff N Tuff Tools Price: $32.50
SALE : $30.60
more info
MSRP: $33.50
Ruff N Tuff Tools Price: $31.83
more info
MSRP: $40.00
Sales Price $38.00
SALE : $36.00

(1)
more info
158194 260J6 Micro V Belt for MK-101 series Tile Saw Small Rip Guide 134551-MK 160488, Side table, MK-370EXP & MK-770EXP Dual 45 Degree Flat Angle Guide,134577-MK O.E.M.
BELT 6J260 Micro V Belt for MK-101 series Tile Saw
Part# 158194
RIP GUIDE, ADJUSTABLE
Part# 134551-MK
Side Table to support larger material. Fits MK-370EXP & MK-770EXP only.
**This item has been discontinued** No alternate is available.
DUAL 45 FLAT ANGLE GUIDE
Part# 134577-MK
Masonry Saw Rip Guide 132332-MK Large Rip Guide FLANGE, OUTER, 5000 4" ASSY FENCE MK-170
MSRP: $45.00
Ruff N Tuff Tools Price: $37.91
more info
MSRP: $45.00
Ruff N Tuff Tools Price: $39.99
more info
MSRP: $47.67
Ruff N Tuff Tools Price: $45.29
SALE : $42.43
more info
MSRP: $50.00
Ruff N Tuff Tools Price: $42.89
more info
Masonry Saw Rip Guide 132332-MK 159751 Large Rip Guide for MK Tile Saws 161304, FLANGE, OUTER, 5000 4" 157406 ASSY FENCE MK-170. MK-170 7" Tile saw adjustable rip guide.
Rip guide for MK-2000 and MK-5000 series masonry saws.
Part# 132332-MK
RIP GUIDE, LARGE DIE CAST
Part# 159751
161304, FLANGE, OUTER, 5000 4"
Part# 161304
ASSY, FENCE MK-170. MK-170 7" Tile saw adjustable rip guide.
Part# 157406
SHAFT MK-101 W/BLADE LCK Zek Wheel Adaptor for MK-SDG-7 Belt, 10J280 BEARING FLANGE 3/4 ID FOR CX-3 Concrete saw
MSRP: $68.00
Ruff N Tuff Tools Price: $45.00

(1)
more info
MSRP: $50.00
Ruff N Tuff Tools Price: $46.55
more info
MSRP: $58.07
Ruff N Tuff Tools Price: $55.17
SALE : $48.95
more info
MSRP: $65.00
Ruff N Tuff Tools Price: $50.00
more info
158222, SHAFT MK-101 W/BLADE LCK 169216 Zek Wheel Adaptor for SDG-7 156111 Belt 10J280 Micro Rib Poly V Belt 165971 BEARING FLANGE 3/4 ID FOR CX-3 Concrete saw
SHAFT MK-101 W/BLADE LCK
Part# 158222
Zek Wheel Adaptor for SDG-7. Allows mounting of Sawtec ZEK abrasive grinding discs on SDG-7.
Part# 169216
Belt 10J280 Micro Rib Poly V Belt
Part# 156111
BEARING FLANGE 3/4 ID FOR CX-3 Concrete saw
Part# 165971
BELT, 10J220 120V/60 Electric Water Pump for 7" Tile Saws 90 Degree Protractor SHAFT, FLEX, 53-3/4"L -1/4 DIA
MSRP: $58.00
Ruff N Tuff Tools Price: $54.60
SALE : $51.95
more info
MSRP: $65.00
Ruff N Tuff Tools Price: $57.75
SALE : $54.15
more info
MSRP: $60.00
Ruff N Tuff Tools Price: $55.00

(1)
more info
MSRP: $60.00
Ruff N Tuff Tools Price: $55.25
more info
156294 BELT 10J220 MK-2005G Belt 155987-MK MK Pump for 7" MK Diamond saws OEM Part 134569-MK 90 Degree Protractor for MK Tile Saw 160176 SHAFT, FLEX, 53-3/4"L -1/4 DIA
BELT 10J220 for MK-2005G 14" Brick saw belt
Part# 156294
Electric water pump for 7" Tile saws. Fits:MK-270;MK-370;MK-370EXP and MK-470.
Part#155987-MK
PROTRACTOR
Part# 134569-MK
SHAFT, FLEX, 53-3/4"L -1/4 DIA
Part# 160176
TUBE, DEPTH CONTROL, 3/4-10 X 18 Aluminum Oxide Dressing Block - 60 Grit 8" x 3" x 2" 153800, BRUSH, MOTOR, LEESON, MK-660 Dry 1-3/8" Quartzite Core Bit with Sidewall diamonds
MSRP: $72.00
Ruff N Tuff Tools Price: $55.31
more info
MSRP: $66.15
Ruff N Tuff Tools Price: $62.84
SALE : $58.87
more info
MSRP: $75.00
Ruff N Tuff Tools Price: $70.00
SALE : $63.00
more info
MSRP: $178.00
Ruff N Tuff Tools Price: $63.99
SALE : $64.00
more info
155049 TUBE, DEPTH CONTROL, 3/4-10 X 18 165241 Aluminum Oxide Dressing Block - 60 Grit 8" x 3" x 2" 153800 BRUSH, MOTOR, LEESON, MK-660 Dry 1-3/8" Quartzite Core Bit with Sidewall diamonds
Part#155049 TUBE, DEPTH CONTROL, 3/4-10 X 18 Aluminum Oxide Dressing Block - 60 Grit 8" x 3" x 2"
Part# 165241
BRUSH, MOTOR, LEESON, MK-660, 1 pair
Part# 153800
Dry 1-3/8" Quartzite Core Bit with Sidewall diamonds. 5/8-11 Thread. Wet/Dry cutting for hard material.
Sidewalls coated with diamonds to help protect from undercutting.
Part# RNTD138BLK5811T
Roller Wheel Assembly for MK-2000 Series Conveyor Cart - Set of 4 POST, PIVOT, MK-212 -COMP BELT, 16J260 Large 45 Degree Bullnose miter
MSRP: $80.00
Ruff N Tuff Tools Price: $75.00
SALE : $65.00

(2)
more info
MSRP: $72.00
Ruff N Tuff Tools Price: $68.95
SALE : $65.00
more info
MSRP: $80.00
Ruff N Tuff Tools Price: $76.00
SALE : $65.00
more info
MSRP: $78.35
Ruff N Tuff Tools Price: $75.00
SALE : $69.99

(2)
more info
133090-MK Roller Wheel set for BX-3 BX-4 & 2000 159418 PIVOT POST 212-4; 212-6 160366 BELT 16J260 153201-MK Large 45 Degree Bullnose miter
Roller Wheel Assembly for MK-2000 Series Conveyor Cart - (Set of 4 wheels with hardware)
Part# 133090-MK
PIVOT POST 212-4; 212-6
Part# 159418
BELT 16J260 Micro V Belt
Part# 160366
BULLNOSE, MITER, 45 LARGE
Part# 153201-MK
PULLEY 16J28 X 1 BORE Side Extension table: MK-100 & MK-101 series PULLEY 16J31 X 1-1/8 BORE BELT 16J240 158824
MSRP: $75.00
Ruff N Tuff Tools Price: $72.50
SALE : $69.99 6 IN STOCK
more info
MSRP: $75.60
Ruff N Tuff Tools Price: $71.82
more info
MSRP: $80.45
Ruff N Tuff Tools Price: $77.85
SALE : $71.99
more info
MSRP: $85.00
Ruff N Tuff Tools Price: $75.00
more info
161135 PULLEY, 16J28 X 1 BORE 162075 Side Extension table:MK-100 & MK-101series 160412 PULLEY 16J31 X 1-1/8 BORE 1588224 BELT 16J240, CX-3 14" Concrete saw Belt 158824
PULLEY, 16J28 X 1 BORE
Part# 161135
Side Extension table:MK-100 & MK-101 series
Part# 162075
PULLEY, 16J31 X 1-1/8 BORE
For MK-5000 series block saws
Part# 160412
BELT 16J240, CX-3 14" Concrete saw Belt
Part# 158824
PAN, PLASTIC MK-270/370/470 MK-225 8" x .050" x 5/8" BELT 16J610 156551 WHEEL, ROLLER MK5000 SET OF 4
MSRP: $85.00
Ruff N Tuff Tools Price: $78.75

(2)
more info
MSRP: $127.05
Ruff N Tuff Tools Price: $95.29
SALE : $82.58
more info
MSRP: $94.61
Ruff N Tuff Tools Price: $84.20
more info
MSRP: $100.00
Ruff N Tuff Tools Price: $95.53
SALE : $85.75 IN STOCK

(3)
more info
155791-MK, PAN, PLASTIC MK-270/370/470 158435 MK-225 8" x .050" x 5/8" 156551 BELT 16J610 152493-MK Set/4 WHEEL, ROLLER MK5000 SET OF 4
155791-MK, PAN, PLASTIC MK-270/370/470 Premium grade thin-rim blades for porcelain & vitreous tile. The stiffening/cooling slots have been designed to guarantee straight cutting in dense porcelain materials.
MK-225 8" x .050" x 5/8"
Part# 158435

BELT 16J610 MK Block saw belt
Part# 156551
152493-MK WHEEL, ROLLER MK5000 SET OF 4, INCLUDES HARDWARE
Part# 152493-MK
PULLEY 16J28 X 3/4 BORE ASSY, SUB, WATER PUMP IXL HINGED DUST SHROUD, 7" DUST SHROUD W/ADAPTERS IXL FULL VACUUM DUST SHROUD, 7" DUST SHROUD W/ADAPATERS
MSRP: $90.72
Ruff N Tuff Tools Price: $86.18
more info
MSRP: $93.45
Ruff N Tuff Tools Price: $88.78
more info
MSRP: $98.70
Ruff N Tuff Tools Price: $93.77
SALE : $88.83

(2)
more info
MSRP: $93.45
Ruff N Tuff Tools Price: $91.11
SALE : $88.84
more info
160362 PULLEY 16J28 X 3/4 BORE 160185 ASSY, SUB, WATER PUMP MK5000 GAS PUMP 166964 MK-IXL 7" HINGED DUST SHROUD W/ UNIVERSAL ADAPTERS 166037, IXL FULL vacuum dust shroud
PULLEY, 16J28 X 3/4 BORE
Fits MK-5005 Series Brick/Block saws
Part# 160362
ASSY, SUB, WATER PUMP MK5000 GAS PUMP
Part# 160185
IXL HINGED DUST SHROUD, 7" DUST SHROUD W/ADAPTERS
Part# 166964
IXL FULL vacuum dust shroud, 7" Dush Shroud with adapters
Part# 166037
BN96-42182B Samsung Speakers BN96-42182B QN75Q7FAMF 120V GFCI, 152610 BELT, 16J430 MK-10 10" x .090" x 5/8"
MSRP: $130.00
Ruff N Tuff Tools Price: $88.95 1 Left in Stock
more info
MSRP: $100.80
Ruff N Tuff Tools Price: $95.76
SALE : $90.72

(1)
more info
MSRP: $125.00
Ruff N Tuff Tools Price: $118.75
SALE : $92.83
more info
MSRP: $181.65
Ruff N Tuff Tools Price: $145.32
SALE : $92.99
more info
BN96-42182B Samsung Speakers BN96-42182B QN75Q7FAMF 120V GFCI, 152610 160367 BELT 16J430 130203 MK-10 10" x .090" x 5/8"
BN96-42182B Samsung Speakers BN96-42182B QN75Q7FAMF
Part# BN96-42182B
CORD, GFCI 120V 15AM
Part# 152610
BELT 16J430 Micro V Belt
Part# 160367
MK-10 10" x .090" x 5/8"Supreme blade for brick.
Part# 130203
120V/60Hz Electric Water Pump for 7" & 10" Tile saw Porcelain Slycer 10" x .060 x 5/8 Supreme Blade 120V/60Hz Electric Water Pump for 7" & 10" Tile saw ASSY, HOUSING, 51" FLEX SHAFT
MSRP: $140.00
Ruff N Tuff Tools Price: $125.00
SALE : $97.95

(4)
more info
MSRP: $212.10
Ruff N Tuff Tools Price: $169.60
SALE : $99.95
more info
MSRP: $120.00
Ruff N Tuff Tools Price: $114.00
SALE : $105.00
more info
MSRP: $123.72
Ruff N Tuff Tools Price: $117.53
SALE : $110.11
more info
151271-MK Water Pump 120V/60Hz O.E.M Tile saw Pump RNTCT10XP10 Porcelain Slycer 10" x .060 x 5/8 Supreme Blade 151271-VP 120V/60Hz Electric Water Pump 159694 ASSY, HOUSING, 51" FLEX SHAFT
Electric Water Pump for Tile & Brick Saws - 115V/60HZ.
*Includes 6' cord and 4' clear vinyl water tubing.
Part#151271-MK

New Porcelain "Slycer"™ 10" x .060 x 5/8" Supreme
The Porcelain "Slycer"™ Supreme with Super HI-Rim has been designed for longer life and with a thicker core for high production jobs that require straight and fast cutting. The higher quality rim blade provides for cutting Porcelain, Granite and other Hard-Vitreous tile.
Part# RNTCT10XP10
PUMP, WATER 115V/60HZ UL
Part# 151271-VP
ASSY, HOUSING, 51" FLEX SHAFT. O.E.M. MK 5000 GAS SAW, PUMP PARTS (#4 HIGHLIGHTED SHOWN FOR REFERENCE ONLY. ALL OTHER PARTS SOLD SEPARATELY)
Part# 159694
Folding Stand for 370EXP MK-212 Transport Wheels BN94-11487E Main Power Control Panel - Genuine OEM for Samsung 75" Motor 7.4 amp MK Tile saws O.E.M. Motor
MSRP: $121.80
Ruff N Tuff Tools Price: $115.71
more info
MSRP: $138.60
Ruff N Tuff Tools Price: $131.67
SALE : $123.35

(1)
more info
MSRP: $185.00
Ruff N Tuff Tools Price: $155.00
SALE : $130.00 1 Left in Stock!
more info
MSRP: $372.00
Ruff N Tuff Tools Price: $353.40
SALE : $135.00 In Stock!

(29)
more info
160131-MK, Folding Stand for 370EXP MK-212 Transport Wheels BN94-11487E Main Power Control Panel - Genuine OEM for Samsung 75" 156428-R Motor O.E.M Fits MK-370, MK-370EXP, MK-270, MK-470, MK-770, MK-770EXP
STAND, MK-370 EXP,PACKAGED
Part# 160131-MK
MK-212 Transport Wheel, Fits MK-212-4 & MK-212-6 saws. BN94-11487E Main Power Control Panel - Genuine OEM
Part# BN94-11487E
156428-R, Replacement motor for MK-270, MK-370, MK-470, MK-770, MK-370EXP & MK-770EXP.
7.4 amp 120V, 1-1/4hp max power.
Typically ships and arrives in 3-5 business days within the continental USA
MK-315GL-XL 7X.060X5/8 PUMP, WATER, MISTING, 115V TX-3 MISTING PUMP CASTING, TABLE MK-100 & MK-101 COMP RNTSA Arrow Cut Series 12"x.125x1 Supreme
MSRP: $298.00
Ruff N Tuff Tools Price: $238.40
SALE : $136.48

(1)
more info
MSRP: $165.00
Ruff N Tuff Tools Price: $137.50

(3)
more info
MSRP: $155.00
Ruff N Tuff Tools Price: $147.25
SALE : $139.50

(1)
more info
MSRP: $320.00
Ruff N Tuff Tools Price: $262.00
SALE : $145.00
more info
170665 $210.00 MK-315GL-XL 7X060X5/8 FREE SHIPPING 164693 PUMP, WATER, MISTING, 115V FOR TX-3 157660 MK-100 & MK-101 Table RNTSA121H A Cut Series 12"x.125x1 Supreme
The MK Diamond's 315GL-XL 7" Glass Tile Blade is specifically designed glass tile blade for cutting glass and mosaic glass tiles . This blade is designed with a very fine diamond grit which consistently gives a smooth and chip-free results. The highest quality materials are used to ensure the best performance in glass cutting, providing straight and true cuts without chipping.
Part# 170665
PUMP, WATER, MISTING, 115V FOR TX-3
Part# 164693
MK-100 & MK-101 Table. Fits saws with "New Blade" lock only.
Part# 157660
RNTSA Arrow Cut Series 12"x.125x1 Supreme cut series of blades provides a fast and smooth cut into all hard and semi hard materials such as Brick, Pavers, Stone, Refractory brick,
Fieldstones, River-rock, and Reinforced concrete.
1-20mm Arbor
Part# RNTSA121H
MK-101 Rock Vise RNTSA Arrow Cut Series 14"x.125x20mm Supreme RNTSA Arrow Cut Series 14"x.125x1 Supreme MTR, 5.0 AMP 115V 50/60
MSRP: $165.90
Ruff N Tuff Tools Price: $157.61
SALE : $147.65
more info
MSRP: $340.00
Ruff N Tuff Tools Price: $272.00
SALE : $159.99
more info
MSRP: $340.00
Ruff N Tuff Tools Price: $272.00
SALE : $159.99
more info
MSRP: $181.91
Ruff N Tuff Tools Price: $172.81
SALE : $161.90

(1)
more info
162523 MK-101 Rock Vise RNTSA141H20 A Cut Series 14"x.125x20mm Supreme RNTSA141H A Cut Series 14"x.125x1 Supreme 157226-G, MTR, 5.0 AMP 115V 50/60Hz
MK-101 Rock Vise
Part# 162523
RNTSA Arrow Cut Series 14"x.125x20mm Supreme cut series of blades provides a fast and smooth cut into all hard and semi hard materials such as Brick, Pavers, Stone, Refractory brick,
Fieldstones, River-rock, and Reinforced concrete.
20mm Arbor (straight 20mm arbor)
Part# RNTSA141H20
RNTSA Arrow Cut Series 14"x.125x1 Supreme cut series of blades provides a fast and smooth cut into all hard and semi hard materials such as Brick, Pavers, Stone, Refractory brick,
Fieldstones, River-rock, and Reinforced concrete.
1-20mm Arbor
Part# RNTSA141H
O.E.M. Replacement motor for MK-170 & MK-377.
MTR, 5.0 AMP 115V- 50/60Hz. Replacement Motor for MK-170 & MK-377EXP.
Part# 157226-G
Core Holder - Vertical ASSY, SHAFT MK-101 W/BLADE LCK BN96-44627A PCB P-One connect Assembly Samsung 75" E201SSC360
MSRP: $183.75
Ruff N Tuff Tools Price: $174.56
SALE : $163.54
more info
MSRP: $185.00
Ruff N Tuff Tools Price: $175.00
more info
MSRP: $275.00 1 Left in Stock
Ruff N Tuff Tools Price: $175.00
more info
MSRP: $225.00
Ruff N Tuff Tools Price: $199.00
SALE : $185.00
more info
161123 Core Sample holder 158222-MK ASSY, SHAFT MK-101 W/BLADE LCK BN96-44627A PCB P-One connect Assembly Samsung 75" E201SSC360 Subaru E201SSC360 Arch MOULDING Rear
Core sample holder kit for MK-2000 and 5000 series saws. Requires drilling saw table for mounting on MK-5000 series saws.
Part# 161123
ASSY, SHAFT MK-101 W/BLADE LCK KIT.
BN96-44627A PCB P-One connect Assembly Samsung 75"
Part# BN96-44627A PCB
E201SSC360 Right Rear Door piece, Forester
2009-2013 Genuine Subaru parts - NEW

Part Number: E201SSC360
Replace(s): E201SSC060
5 Piece Cutting Kit Folding Stand for TX3 MK-315GL-XL 10X065X5/8 BN94-11439A Power Supply PC Board for Samsung 75"
MSRP: $208.00
Ruff N Tuff Tools Price: $197.60
SALE : $187.20
more info
MSRP: $215.25
Ruff N Tuff Tools Price: $204.49
SALE : $191.57
more info
MSRP: $425.00
Ruff N Tuff Tools Price: $340.00
SALE : $194.65

(1)
more info
MSRP: $300.00
Ruff N Tuff Tools Price: $199.00 1 Left in Stock
more info
155954 5 Piece Cutting Kit MK Diamond 166445 Folding Stand for TX3 170666 $210.00 MK-315GL-XL 10X065X5/8 Free Shipping BN94-11439A Power Supply PC Board for Samsung 75"
5 Piece Cutting Kit includes (Large Rip Guide, Dual 45 Flat angle guide, Protractor, 45 Degree Miter, Dressing Stone and handy black carrying case).
Buy the KIT and SAVE over buying them individually and get the carrying case included.
Part# 155954
Folding Stand for TX3 Model only. The MK Diamond's 315GL-XL 10" Glass Tile Blade is specifically designed glass tile blade for cutting glass and mosaic glass tiles . This blade is designed with a very fine diamond grit which consistently gives a smooth and chip-free results. The highest quality materials are used to ensure the best performance in glass cutting, providing straight and true cuts without chipping.
Part# 170666

BN94-11439A Power Supply PC Board for Samsung 75"
Part# BN94-11439A
Saw Stand with Caster Wheels STAND KIT FIXED LEG MS 360 Folding Stand BN39-02301A One-connect Cable Samsung
MSRP: $226.00
Ruff N Tuff Tools Price: $214.70
SALE : $203.40
more info
MSRP: $222.00
Ruff N Tuff Tools Price: $210.90
more info
MSRP: $248.85
Ruff N Tuff Tools Price: $236.41
SALE : $221.48
more info
MSRP: $325.00 1 left in Stock
Ruff N Tuff Tools Price: $225.00
more info
169243 Folding Saw Stand with Casters for MK-101 (167979), MK-101-24 (169612) MK-101 HD (169212) & Current Model MK-1080 (153203). STAND KIT FIXED LEG MS 360 579596401 168244 Folding Stand for MK 10" Tile saws BN39-02301A One-connect Cable Samsung
Folding Saw Stand with Casters for MK-101 (167979), MK-101-24 (169612) MK-101 HD (169212) & Current Model MK-1080 (153203).
Part# 169243,
STAND KIT FIXED LEG MS 360
Part# 579596401
Folding Stand for MK-101 series (fits serial number
Part# 168244
BN39-02301A One-connect Cable Samsung
Part# BN39-02301A
BEARING,1.0 ID PILLOW BLOCK FOR HVY DTY BLADE SHAFT MK-5000 SERIES Folding Stand MK-275 PROFILE WHL10 3/8 RAD 80419 Folding Stand for CC600T 7" Tile Saw
MSRP: $253.16
Ruff N Tuff Tools Price: $240.50
SALE : $225.31
more info
MSRP: $270.90
Ruff N Tuff Tools Price: $25.36
SALE : $243.81
more info
MSRP: $553.35
Ruff N Tuff Tools Price: $442.68
SALE : $259.00
more info
MSRP: $278.00
Ruff N Tuff Tools Price: $261.10
SALE : $259.99
more info
BEARING,1.0 ID PILLOW BLOCK FOR HVY DTY BLADE SHAFT MK-5000 SERIES 153331 Folding Stand 152022, MK-275 PROFILE WHL10 3/8 RAD 80419 Folding Stand for CC600T 7" Tile Saw 6043383
BEARING,1.0 ID PILLOW BLOCK, Part# 157924
*Sold individually, but recommended to be replaced in pairs*
Folding Stand for MK-2000 series and certain MK Tile saws.
Part# 153331


MK-275 PROFILE WHL10 3/8 RAD
Part# 152022
Folding Stand for CC600T 7" Tile Saw
Cat # 80419
Part# 6043383
Stand with Caster Wheels 3043528 ASSY, TABLE, PRO-24 MK-RD100 10X062X5/8 GLASS BLADE MK-212 Side Table
MSRP: $275.00
Ruff N Tuff Tools Price: $261.25
more info
MSRP: $294.53
Ruff N Tuff Tools Price: $279.80
SALE : $262.13
more info
MSRP: $496.65
Ruff N Tuff Tools Price: $397.32
Price Good While Supplies Last! $265.00 2 in Stock

(1)
more info
MSRP: $320.25
Ruff N Tuff Tools Price: $304.24
SALE : $288.23
more info
Stand with Caster Wheels 3043528 ASSY, TABLE, PRO-24 159326 MK-RD100 10" GLASS BLADE 165884, MK-212 series side table 23" x 9"
Stand with Caster Wheels 3043528
Cat 03734
ASSY, TABLE, PRO-24 MK-RD100 10" x .062" x 5/8" Supreme Resin bonded Glass Blade.
MK Diamonds BEST Glass cutting blade. Made specifically for cutting glass bottles and other glass materials where chipping must be kept to a minimum.
PART# 159326
MK-212-4 and MK-212-6 Side table.  23" x 9".  For use with MK-212-4 and MK-212-6
RNTSA Arrow Cut Series 20"x.160x1 Supreme ASSY,PUMP,300GPH 230V 50/60HZ ASSY ARBOR, MK-5000 Core clamp
MSRP: $630.00
Ruff N Tuff Tools Price: $567.00
SALE : $299.99
more info
MSRP: $383.25
Ruff N Tuff Tools Price: $364.09
SALE : $344.93
more info
MSRP: $365.00
Ruff N Tuff Tools Price: $358.00
SALE : $349.99 3 IN STOCK
more info
MSRP: $397.00
Sale Price $377.15
SALE : $357.30
more info
RNTSA20IH Arrow Cut Series 20"x.160x1 Supreme Concrete/Brick Blade 114769-MK 5010S Water pump Electric Water Pump for Brick saw ASSY, ARBOR, MK-5000, Part# 161308, 172189 Core Clamp for 4" to 6" cores
RNTSA20IH Arrow Cut Series 20"x.160x1 Supreme cut series of blades provides a fast and smooth cut into all hard and semi hard materials such as Brick, Pavers, Stone, Refractory brick, Fieldstones, River-rock, and reinforced concrete.
Part# RNTSA20IH
MK 5010S Water pump Electric Water Pump for Brick saw 230V/60Hz
Part# 114769-MK
ASSY, ARBOR, MK-5000, Part# 161308
Fits MK-5000 series block saws with standard blade shaft assemblies.
Part# 161308

Features:

Adjustable opening allows for secure placement, without damaging core.

Cuts through a 6” core with a single pass using a 16” or larger blade

Easy installation on most masonry and block saws with a sliding table

Powder coated finish

Adapter available for 4” cores

Includes 2-3/8” bolts, washers and Nylock nuts for installation - Must be mounted by drilling into existing table
Part# 172189

RNTSA Arrow Cut Series 24"x.160x1 Supreme BX series Replacement Motor. 157801-C Husqvarna Conveyor Cart Assembly Table COUPLING,FLEXIBLE MK DDG-11
MSRP: $690.00
Ruff N Tuff Tools Price: $552.00
SALE : $379.50
more info
MSRP: $390.00
RNT Price $385.00

(7)
more info
MSRP: $465.00
Ruff N Tuff Tools Price: $441.75
SALE : $399.99
more info
MSRP: $483.00
Ruff N Tuff Tools Price: $458.85
SALE : $429.87
more info
RNTSA24IH Arrow Cut Series 24"x.160x1 Supreme Concrete/Brick Blade 157801-C motor. Fits BX-4, TX-3 and BX-3 Brick saws. 584875701 Husqvarna Conveyor Cart Assembly Table 157411, COUPLING,FLEXIBLE MK
RNTSA20IH Arrow Cut Series 20"x.160x1 Supreme cut series of blades provides a fast and smooth cut into all hard and semi hard materials such as Brick, Pavers, Stone, Refractory brick, Fieldstones, River-rock, and reinforced concrete.
Part# RNTSA20IH
Motor. Fits BX-4, TX-3 and BX-3 Brick saws, SDG-7 floor scraper, MK-1590 stone saws.
Part# 157801-C
Husqvarna Conveyor Cart Assembly Table.
Fits MS 610 and MS 610G
Part# 584875701
Old part# 542190419
COUPLING,FLEXIBLE.
O.E.M part Fits: MK DDG-11, MK-SDG-11, DDG-5, SDG-3, DDG-1.5, Sawtec SDG-101 and Sawtec SDG-103 models.
Part# 157411
MTR, 3/4HP 110V 60HZ MK660-NEW MK-2000 conveyor cart MK-IXL Hinged Vacuum Shroud - "5 pack" KIT, WATER TANK, CX-3
MSRP: $477.90
Ruff N Tuff Tools Price: $454.01
SALE : $430.11
more info
MSRP: $485.00
Ruff N Tuff Tools Price: $460.75
SALE : $436.50

(1)
more info
MSRP: $491.40
Ruff N Tuff Tools Price: $466.83
5 PACK PRICING $437.35
more info
MSRP: $495.60
Ruff N Tuff Tools Price: $470.82
SALE : $441.08
more info
154292-MK, MTR, 3/4HP 110V 60HZ MK660-NEW 133082 MK-2000 series conveyor cart O.E.M. MK Diamond 167130 (5 PACK) MK-IXL HINGED DUST SHROUD 166784 KIT, WATER TANK, CX-3
154292-MK, MTR, 3/4HP 110V 60HZ MK660-NEW
Complete table assembly including roller wheels, metal backstop and wood strip for MK-2000 series Brick saws
Part# 133082
MASTER PACK, IXL HINGED DUST SHROUDS
Part# 167130
KIT, WATER TANK, CX-3
Part# 166784
MK-IXL Full Vacuum Shroud - "5 pack" ASSY, PUMP, WATER, 5000 GAS MK-212-6 Side Table Saw Tent - MK Diamond Products
MSRP: $467.25
Ruff N Tuff Tools Price: $455.56
SALE : $444.20
more info
MSRP: $521.85
Ruff N Tuff Tools Price: $495.76
SALE : $469.67
more info
MSRP: $583.00
Ruff N Tuff Tools Price: $553.85
SALE : $524.70
more info
MSRP: $617.40
Ruff N Tuff Tools Price: $586.53
Contractor Special $555.66

(3)
more info
167129 MASTER PACK, MK-IXL FULL 152355 Centrifugal Water Pump 5000 MK-5000 GAS WTR PUMP 167986, MK-212-6 Side Table 169658 Saw Tent
MASTER PACK, MK-IXL FULL
Part# 167129
ASSY, PUMP, WATER, 5000 GAS
Part# 152355
33" x 24". For use with MK-212-4 and MK-212-6
Saw Tent. The Saw Tent is designed to contain spray and debris when cutting tile or masonry material. You can cut anywhere without the worry of your surroundings. It is easy to assemble and retracts into a small storage bagTent.
Dimensions 47” x 60” x 62”
Part# 169658
STAND PREMIUM MS 360 1.5 hp Motor for MK-101 MOTOR, 1-1/2HP, 115V, 60HZ MTR, 1-1/2HP, 115V, SBOX, GRN
MSRP: $595.00
Ruff N Tuff Tools Price: $565.25
more info
MSRP: $668.00
Ruff N Tuff Tools Price: $575.00

(1)
more info
MSRP: $668.00
Ruff N Tuff Tools Price: $575.00

(12)
more info
MSRP: $668.00
Ruff N Tuff Tools Price: $575.00

(2)
more info
590296801 STAND PREMIUM MS 360 MK 101 MOTOR 1.5HP 120V/60HZ-REPLACED WITH 168022G 168022G MTR, 1-1/2HP, 115V, 60HZ MK 101 MOTOR 1.5HP 120V/60HZ
STAND PREMIUM MS 360
Part# 590296801
160127, MK 101 MOTOR 1.5HP 120V/60HZ (MOTOR ONLY. PULLEY AND HARDWARE SOLD SEPARATELY)
This item has been Discontinued - see 1.5 HP motor part # 168022G
168022G MTR, 1-1/2HP, 115V, 60HZ, MTR, 1-1/2HP, 115V, 60HZ, Fits MK-100, MK-101 Series Tile saws.
*Motor only. Pulley and hardware sold separately.*
Part# 168022G (Motor is special order only)
MK-101 Motor, 1.5Hp 120V/60Hz, Fits all MK-101Pro and Pro24 tile saws. (OEM Motor only - Pulley and hardware not included)
MTR, 1-1/2HP, 120V/60Hz, SBOX, GRN, 30amp switch sold separately.
Part# 169223G
MOTOR, 1-1/2HP, 115V, 60HZ MTR, 2 HP SOGA, 115V, 60HZ MK Diamond 212 saw motor ASSY,BLD SHFT,HVY DTY 5000 MK-5000 Blade Shaft assembly
MSRP: $668.00
Ruff N Tuff Tools Price: $575.00
more info
MSRP: $678.00
Ruff N Tuff Tools Price: $644.10
SALE : $623.00

(6)
more info
MSRP: $773.60
Ruff N Tuff Tools Price: $639.35
SALE : $650.00
more info
MSRP: $733.43
Ruff N Tuff Tools Price: $699.99
SALE : $665.00 (2 Available)

(1)
more info
168022GH MTR, 1-1/2HP, 115V, 60HZ 162078 MTR, 2 HP SOGA, 115V, 60HZ MK Diamond 212 Saw Motor 160645, ASSY,BLD SHFT,HVY DTY 5000 170951 MK-5000 OIL BATH HD BLD SHFT 5000
168022GH MTR, 1-1/2HP, 115V, 60HZ, MTR, 1-1/2HP, 115V, 60HZ, Fits MK-2000 and MK-2001SV 14" Brick saws. MTR, 1.5HP 115VAC 3400RPM, HHAC56008
*Motor only. Pulley and hardware sold separately.*
Part# 168022GH (Motor is special order only)
MTR, 2 HP SOGA, 115V, 60HZ
Fits MK-212-4 and MK-212-6 rail saws
Part# 162078
160645, ASSY,BLD SHFT,HVY DTY 5000, FITS ALL HEAVY DUTY BLADE SHAFT
Includes two bearings, heavy duty blade shaft, both inner and out flanges and all hardware shown above.
MK-5000 OIL BATH HD BLD SHFT 5000
Part# 170951
ASSY,MTR.1.5HP,120V,60HZ MK-5000 series conveyor cart MK-5000 series heavy duty, 6 wheel conveyer cart with handle 165991 TX-4 TILESAW W/FLOOD SYS 120V
MSRP: $718.80
Ruff N Tuff Tools Price: $682.86
more info
MSRP: $854.70
Ruff N Tuff Tools Price: $811.97
SALE : $769.23
more info
MSRP: $1,061.55
Ruff N Tuff Tools Price: $1,008.47
SALE : $944.78
more info
MSRP: $1,317.75
Ruff N Tuff Tools Price: $1,251.86
Contractor Special $1,027.85
more info
160486, ASSY,MTR.1.5HP,120V,60HZ 152124 Table MK-5000 series conveyor cart, Block saw table 165991, Heavy duty, six wheel conveyer cart/handle 171231 TX-4 10" Tile saw w/Flood system
ASSY,MTR.1.5HP,120V,60HZ. Includes motor with 30amp switch box
Fits All MK-101Pro & MK -101Pro24 (Saw model # 155747 and 153243)
Part# 160486
Conveyor cart for All MK-5000 series Masonry saws. Fits all models MK-5000 series saws. Complete with wheels!
Part#152124
Heavy duty, six wheel conveyer cart & handle
Part# 165991
TX-4 TILESAW W/FLOOD SYST.120V/60Hz The TX-4™ features an innovative maintenance free guide bar system that eliminates the need for regular lubrication. The tilting head allows 22.5 and 45 degree miter cuts. The water distribution system provides a controllable, even flow to both sides of the blade. One-year limited warranty.
Part# 171231
MK-1590 Rail Saw Higgins Corner Cutting Jig Higgins Corner/Veneer Cutting Jig with Riser
MSRP: $2,232.50
Ruff N Tuff Tools Price: $2,120.88
SALE : $1,741.35 DISCONTINUED
more info
MSRP: $3,090.00
Ruff N Tuff Tools Price: $2,935.50
SALE : $2,781.00
more info
MSRP: $3,942.00
Ruff N Tuff Tools Price: $3,744.90
SALE : $3,547.80
more info
MK-1590 Rail Saw
Part# 166105 169548 Higgins Corner Cutting Jig 170158 Higgins Corner/Veneer Cutting Jig w/ Riser
MK-1590 Rail saw
Part# 166105
The Higgins Jig is an exceptionally fast and safe tool for producing 2 x 8 right angle corners, paver corners, and lintel corners. The patent pending design allows for a two-step process when cutting corner brick or stone veneers. When compared to the usual 4 to 5 step process the Higgins Jig can reduce cutting time to just 10 seconds, depending on the type of material being cut.
Part# 169548
The Higgins Jig is an exceptionally fast and safe tool for producing 2 x 8 right angle corners, paver corners, and lintel corners. The patent pending design allows for a two-step process when cutting corner brick or stone veneers. When compared to the usual 4 to 5 step process the Higgins Jig can reduce cutting time to just 10 seconds, depending on the type of material being cut.
Part# 170158