The MK-5000 Series of block saws set the quality standard for durability and maintenance-free operation. These saws are specially designed to provide the highest level of productivity, operator safety and convenience. Heavy-duty cast aluminum and steel parts ensure the finest value in the masonry and stone industry.
MK-5010T Block Saw - 60HZ 460V 3-Phase with 24" Blade Guard
460V/60Hz Single Phase block saw with Heavy Duty bearings and 24" blade capacity.
MK-5000 Electric Series Features:
- Precision screw feed mechanism allows the cutting head to be easily raised or lowered to the precise cutting depth required
- Self-leveling blade guard provides optimum blade coverage for operator safety
- Foot pedal for hands-free cutting
- Open-back design allows for material up to 20" long to be cut
- Conveyor cart built from heavy-duty cast aluminum
- 3 phase saws are equipped with GE NEMA 1 starters in NEMA 12 enclosure
- Adjustable water supply for maximum blade protection
- Built-in tie-downs for safer saw transport
- Ergonomically designed handle for reduced operator fatigue
- Heavy-duty built-in forklift brackets allow lift to approach from the front or either side of the saw
- One-year limited warranty
** Don't forget to tell our sales associate what you're cutting so they can offer you the best blade at the lowest price.
Call 888-747-8593 now.
Part# 169331
General Specifications |
Motor | Baldor |
Arbor Size | 1" |
Motor RPM | 1,725 |
Shaft RPM - 14" Blade | 2,700 |
Shaft RPM - 20" Blade | 1,925 |
Shaft RPM - 24" Blade | 1,540 |
Depth of Cut - 14" Blade | 5" |
Depth of Cut - 20" Blade | 8" |
Depth of Cut - 24" Blade | 10" |
Weight - MK-5005 | 451 lbs. (205 kg) |
Weight - MK-5007 | 485 lbs. (220 kg) |
Weight - MK-5009 | 485 lbs. (220 kg) |
Weight - MK-5010 | 513 lbs. (233 kg) |
Length of Cut | 20" |
L x W x H | 53" x 26" x 63" |
L x W x H (mm) | 1,346 x 660 x 1,600 |
Shipping Method | Truck |
![]()
![]()
20" Guard shown for reference only. Actual guard will be 24" capacity
![]()
Open back design allows 8" high block to be cut in a single pass
![]()
The MK 5000 conveyor card is built from heavy-duty cast aluminum. A skid resistant rubber top is permanently bonded to the table top for wear resistance.
Water flow control vents channel water during cutting operations into the water pan. Nylon conveyor cart wheels have permanently sealed bearings.
![]()
All 3 Phase saws are equipped with GE NEMA size 1 starters with NEMA 12 enclosures. Safety switch prevents accidental restart if electrical current is disrupted. The power cord is a minimum of 6 feet and comes ready for panel wiring.
![]()
The foot pedal may be used to step cut, drop cut. Using the foot pedal frees both of the operators hands for holding the masonry material.
![]()
Heavy Duty built in forklift brackets allow lift to approach from any side.
![]()
Warning: Use of this equipment can expose you to chemicals including nickel and crystalline silica which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. Repeated and/or substantial inhalation can cause serious or fatal respiratory diseases including silicosis. Employ dust controls and protection per OSHA/NIOSH/MSHA
