MK-5000 Series Features:
- Precision screw feed mechanism allows the cutting head to be easily raised or lowered to the precise cutting depth required
- Self-leveling blade guard provides optimum blade coverage for operator safety
- Open-back design allows for material up to 20" long to be cut
- Conveyor cart built from heavy-duty cast aluminum
- Adjustable water supply for maximum blade protection
- Built-in tie-downs for safer saw transport
- Ergonomically designed handle for reduced operator fatigue
- Engine attachment is via four vibration isolation mounts
- Belt driven, self-priming centrifugal water pumps can be disengaged for dry cutting
- Heavy-duty built-in forklift brackets allow lift to approach from the front or either side of the saw
One-year limited warranty
FREE SHIPPING to a Business address only. Shipments to a residence may still receive FREE shipping, but may be charged a residential delivery fee ($65.00) and lift gate fee ($50.00). If ordering for residential delivery - ask for "pickup at Fedex Freight terminal" option in order to continue to receive free shipping.
*Blade sold separately and shown for display purposes only
Don't Forget To Order Your Blade With Ruff N Tuff Tools For Additional Savings
| Model | MK-5009G | MK-5009G |
| Engine | Honda GX270 Cyclone | Kohler CH395 |
| Weight | 498 lbs. (225kg) | 498 lbs. (225kg) |
| Part # (14" Blade Guard) | 158935-14 | • |
| Part # (20" Blade Guard) | 158935 | 168805 |
| Part # (24" Blade Guard) | 158935-24 | 168805-24 |
| Model | MK-5010G | MK-5013G |
| Engine | Vanguard 19H200 | Honda GX390 Cyclone |
| Weight | 513 lbs. (233kg) | 513 lbs. (233kg) |
| Part # (20" Blade Guard) | 169338 | 158936 |
| Part # (24" Blade Guard) | 169338-24 | 158936-24 |
| General Specifications | | Arbor Size | 1" | | Motor RPM | 3,600 | | Shaft RPM - 14" Blade | 2,700 | | Shaft RPM - 20" Blade | 1,851 | | Shaft RPM - 24" Blade | 1,653 | | Depth of Cut with 14" Blade | 5" | | Depth of Cut with 20" Blade | 8" | | Depth of Cut with 24" Blade | 10" | | Length of Cut | 20" | | L x W x H | 57" x 26" x 72" | | L x W x H (mm) | 1,524 x 660 x 1,826 | | Shipping Method | Truck |
|
|
| Accessories Included with MK-5000 Gas Saws | | Centrifugal Water Pump | Rip Guide
|
|
|
|
|
|
![]()
Stay level blade guard gives 180º coverage at all times.
![]()
Open-back design allows 8" high block to
be cut in a single pass.
![]()
The MK-5000 conveyor cart is built from
heavy-duty cast aluminum. A skid-resistant
rubber top is permanently bonded to the table
top for wear resistance. Water-flow control
vents channel water during cutting operations
to the water pan. Nylon conveyor cart wheels
have permanently sealed bearings.
![]()
Gas saw cutting heads are designed to
keep the rotation of the motor within the
manufacturer's requirement of degrees
of motion.
![]()
Heavy-duty built-in forklift brackets allow
lift approach from front, back, or either side.
![]()
Warning: This product can expose you to chemicals including nickel and crystalline silica, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
