MK-5000 Electric Series Features:
- Precision screw feed mechanism allows the cutting head to be easily raised or lowered to the precise cutting depth required
- Self-leveling blade guard provides optimum blade coverage for operator safety
- Open-back design allows for material up to 20" long to be cut
- Conveyor cart built from heavy-duty cast aluminum
- 3 phase saws are equipped with GE NEMA 1 starters in NEMA 12 enclosure
- Adjustable water supply for maximum blade protection
- Built-in tie-downs for safer saw transport
- Ergonomically designed handle for reduced operator fatigue
- Heavy-duty built-in forklift brackets allow lift to approach from the front or either side of the saw
- One-year limited warranty
- Lift gate and residential delivery charges may apply. We can also deliver to your local freight terminal instead for a reduced service fee.
| General Specifications |
| Motor | Baldor |
| Arbor Size | 1" |
| Motor RPM | 1,725 |
| Shaft RPM - 14" Blade | 2,700 |
| Shaft RPM - 20" Blade | 1,925 |
| Shaft RPM - 24" Blade | 1,540 |
| Depth of Cut - 14" Blade | 5" |
| Depth of Cut - 20" Blade | 8" |
| Depth of Cut - 24" Blade | 10" |
| Length of Cut | 20" |
| L x W x H | 53" x 26" x 63" |
| L x W x H (mm) | 1,346 x 660 x 1,600 |
| Shipping Method | Truck/Terminal Del. available |
Motors available in other electrical configurations.
| Accessories Included with MK-5000 Saws |
| Electric Water Pump |
| Rip Guide |
|
| Stay level blade guard gives 180º coverage at all times. |
|
![]()
|
|
| Open-back design allows 8" high block to be cut in a single pass. |
|
![]()
|
|
| All 3 phase saws are equipped with GE NEMA size 1 starters with NEMA 12 enclosure. The power cord is a minimum length of 6 feet and comes ready for panel wiring. Additional power cord length is available upon request. |
|
![]()
|
|
| The MK-5000 conveyor cart is built from heavy-duty cast aluminum. A skid-resistant rubber top is permanently bonded to the table top for wear resistance. Water-flow control vents channel water during cutting operations to the water pan. Nylon conveyor cart wheels have permanently sealed bearings. |
|
![]()
|
|
|
Fork Lift brackets buil-in
![]()
![]()
Warning: This equipment contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. These chemicals are contained in various components. fluids and paints including, but not limited to fuel, oil, electric motors and batteries. In addition, gasoline/diesel powered equipment emits engine exhaust and fumes, and when serviced, cleaned or maintained generate used oil, waste fluids, fumes, grease, grime and particulates from the component wear and silica dust which contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go towww.P65Warnings.ca.gov
Warning: