MK-5000 Electric Series Features: 5HP 3PH 208-230V 20" BLADE GUARD
- Precision screw feed mechanism allows the cutting head to be easily raised or lowered to the precise cutting depth required
- Self-leveling blade guard provides optimum blade coverage for operator safety
- Open-back design allows for material up to 20" long to be cut
- Conveyor cart built from heavy-duty cast aluminum
- 3 phase saws are equipped with GE NEMA 1 starters in NEMA 12 enclosure
- Adjustable water supply for maximum blade protection
- Built-in tie-downs for safer saw transport
- Ergonomically designed handle for reduced operator fatigue
- Heavy-duty built-in forklift brackets allow lift to approach from the front or either side of the saw
- One-year limited warranty
- Lift gate and residential delivery charges may apply. We can also deliver to your local freight terminal instead for a reduced service fee.
| General Specifications |
| Motor | Baldor |
| Arbor Size | 1" |
| Motor RPM | 1,725 |
| Shaft RPM - 14" Blade | 2,700 |
| Shaft RPM - 20" Blade | 1,925 |
| Shaft RPM - 24" Blade | 1,540 |
| Depth of Cut - 14" Blade | 5" |
| Depth of Cut - 20" Blade | 8" |
| Depth of Cut - 24" Blade | 10" |
| Length of Cut | 20" |
| L x W x H | 53" x 26" x 63" |
| L x W x H (mm) | 1,346 x 660 x 1,600 |
| Shipping Method | Truck/Terminal Del. available |
Motors available in other electrical configurations.
| Accessories Included with MK-5000 Saws |
| Electric Water Pump |
| Rip Guide |
|
| Stay level blade guard gives 180º coverage at all times. |
|
![]()
|
|
| Open-back design allows 8" high block to be cut in a single pass. |
|
![]()
|
|
| All 3 phase saws are equipped with GE NEMA size 1 starters with NEMA 12 enclosure. The power cord is a minimum length of 6 feet and comes ready for panel wiring. Additional power cord length is available upon request. |
|
![]()
|
|
| The MK-5000 conveyor cart is built from heavy-duty cast aluminum. A skid-resistant rubber top is permanently bonded to the table top for wear resistance. Water-flow control vents channel water during cutting operations to the water pan. Nylon conveyor cart wheels have permanently sealed bearings. |
|
![]()
|
|
|
Fork Lift brackets buil-in
![]()
![]()
Warning: Use of this product & equipment can expose you to chemicals including nickel and crystalline silica which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. Repeated and/or substantial inhalation can cause serious or fatal respiratory diseases including silicosis. Employ dust controls and protection per OSHA/NIOSH/MSHA
Warning: