CPG210H CPG200 DUAL HEAD FLOOR GRINDER

CPG210H CPG200 DUAL HEAD FLOOR GRINDER
Cat# 42874
Part# 5801238



Product Description

Accommodates Both Diamond Grinding Heads and Grinding Blocksfor Large Grinding Jobs. 10”/12” Head Capacity. 24" of Coverage. Gasolineand Electric Models.

Features & Benefits:

• Remote throttle
• 2” dust port opening
• Multiple grease point
• 1/4” thick steel box frame
• Water hose connection
• Adjustable operator handles
• Multiple lifting handles and single lifting point
• Dual head allows large 24” grinding area with two 12” grinding heads
• 4 rear axle positions and swivel axle
• Matches the height of the grinding head being used and allows for rapid change in weight distribution during grinding or transport
• Can use diamond grinding head, carbide blocks or grinding stones

NOTE: Each Floor Grinder comes with one 65 lb weight ballast(*excludes Model # CPG202E1) Optional Second weight available 2501047 47017 ------ $308

* Must specify 115V or 230V when ordering Horsepower asrated by the engine manufacturer

Motor/Engine Power	Engine/Motor Make	Power Source	Head Capacity	Part Number	Catalog Number
7.5 HP-3PH, 230V	Baldor®	Electric	(2)10”/(2)12”	5801237A	42802
10.2 HP	Honda® GXV390	Gas	(2)10”/(2)12”	5801238	42874
2 HP-1PH, 115V or 230V	Baldor®	Electric	(2)10”/(2)12”	5801235	42765
7.5 HP-1PH, 230V	Baldor®	Electric	(2)10”/(2)12”	5801236	42793
7.5 HP-3PH, 460V	Baldor®	Electric	(2)10”/(2)12”	5801237B	42827

Warning: Use of this product & equipment can expose you to chemicals including nickel and crystalline silica which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. Repeated and/or substantial inhalation can cause serious or fatal respiratory diseases including silicosis. Employ dust controls and protection per OSHA/NIOSH/MSHA