CC1305E3XL-14 SMALL WALK BEHIND SAW 5HP 230V 60HZ 3 PHASE
Part# 5800578A CAT# 99977
Features& Benefits- Heavy duty frame design
- Cyclone air filter (Honda® models)
- Easy to maneuver push drive
- Four position heavy duty handles offer no slack and don't rattle like other adjustable handles
- Through rear axle for added strength
- Solid sealed and self-aligning blade shaft bearings
- Slip-on blade guard for easy blade access
- Three V-belts for extra power delivery to the blade shaft
- Left or right-side sawing
- Baldor 5hp 230V 60HZ 3 PH
- Optional water tank available for dust suppression
Maximum depth of cut with 14" blade: | 4-5/8" |
Maximum depth of cut with 18" blade: | 6-5/8" |
Maximum depth of cut with 20" blade: | 7-5/8" |
Blade shaft RPM: | 2,600 |
Blade shaft diameter: | 1-1/4" |
Arbor size: | 1" with single drive pin |
Blade mounting: | Right or left |
Blade raise/lower: | Precision screw feed |
Handle bars: | Adjustable |
Parts List # (Gas): | 1801801 |
Parts List # (Electric) | 1801809 |
Operator Manual #: | 1801459 |
![]()
5Hp 230V-480V 60Hz 1 Phase / 3 Phase
![]()
10Hp 230V-460V 60Hz 3Phase
![]()
- Optional water tank available for dust suppression
- Blade shown for reference only. Not included with saw.
![]()
![]()
Warning: Use of this product & equipment can expose you to chemicals including nickel and crystalline silica which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. Repeated and/or substantial inhalation can cause serious or fatal respiratory diseases including silicosis. Employ dust controls and protection per OSHA/NIOSH/MSHA
