Click here to phone an agent




Image result for visa card

Ruff N Tuff Tools
15411 W. Waddell Rd.
Suite 102
Surprise AZ 85379
888-747-8593

You are here:Home > MK Diamond ™ > Tile > Tile Saws > MK-101 Pro24JCS
Click below for more information :
Accessories
Sort By:
Page of 2
159414 MK-212-4 Tile & Stone Saw
MK-212-4 Tile & Stone Saw
MSRP: $3,032.00
Ruff N Tuff Tools Price: $2,880.40
SALE : $2,425.60

(2)

2 HP Wet Cutting Tile & Stone Saw, 10" blade capacity, Rip cuts 36" and Diagonally cuts 24" tile. 2" depth of cut. Italian made motor.
Free shipping applies to orders placed online. Call our support staff 24/7 at 888-747-8593 with any questions.
Part#159414
more info
153243-JCS MK-101 PRO 24 JCS 10" Pro Tile Saw
MK-101PRO24 JCS
MSRP: $2,545.00
Ruff N Tuff Tools Price: $2,417.75
SALE : $2,275.00

(1)

MK-101PRO24JCS 10" Tile Saw W/Built-In Stand
The MK-101 Pro24 JCS has all the features of the MK-101 but with an extended frame that allows the cutting of tiles up to 24" in length and an integrated stand that allows operator to set up or transport in a matter of seconds.

In addition it is equipped with an aluminum table with nonslip molded neoprene surface. The permanently lubricated blade shaft bearings provide years of maintenance-free operation. The blade guard has been engineered to provide optimal water flow and is wide enough to accommodate a profile wheel.

Part# 153243-JCS,
more info
152993 MK-101 1-1/2HP 50HZ 220V
MK-101 1-1/2HP 50HZ 220V
MSRP: $2,222.05
Ruff N Tuff Tools Price: $2,110.95
SALE : $1,777.64

MK-101 220V/50Hz, 10" Wet Cutting Tile Saw, 1-1/2 HP Rip cut 20" and Diagonally cut 14".
Part# 152993
more info
MK-1590 Rail Saw
Part# 166105
MK-1590 Rail Saw
MSRP: $1,850.00
Ruff N Tuff Tools Price: $1,575.50
SALE : $1,443.00

MK-1590 Rail saw
Part# 166105
more info
151991 MK-101 10" PROFESSIONAL TILE SAW 1.5HP 120/60HZ
MK-101 TILE SAW 1-1/2HP 110V/60Hz
MSRP: $1,332.06
Ruff N Tuff Tools Price: $1,265.46
SALE : $1,025.00

MK-101 10" Wet Cutting Tile Saw, 1-1/2 HP Rip cut 20" and Diagonally cut 14".
Part# 151991
more info
160486, ASSY,MTR.1.5HP,120V,60HZ
ASSY,MTR.1.5HP,120V,60HZ
MSRP: $718.80
Ruff N Tuff Tools Price: $682.86
SALE : $646.92

ASSY,MTR.1.5HP,120V,60HZ. Includes motor with 30amp switch box
Fits All MK-101Pro & MK -101Pro24 (Saw model # 155747 and 153243)
Part# 160486
more info
169658 Saw Tent
Saw Tent - MK Diamond Products
MSRP: $588.00
Ruff N Tuff Tools Price: $558.60
Contractor Special $529.30

(3)

Saw Tent. The Saw Tent is designed to contain spray and debris when cutting tile or masonry material. You can cut anywhere without the worry of your surroundings. It is easy to assemble and retracts into a small storage bagTent.
Dimensions 47” x 60” x 62”
Part# 169658
more info
MK 101 MOTOR 1.5HP 120V/60HZ
MTR, 1-1/2HP, 115V, SBOX, GRN
MSRP: $528.00
Ruff N Tuff Tools Price: $501.60
SALE : $475.20

(2)

MK-101 Motor, 1.5Hp 120V/60Hz, Fits all MK-101Pro and Pro24 tile saws. (OEM Motor only - Pulley and hardware not included)
MTR, 1-1/2HP, 120V/60Hz, SBOX, GRN, 30amp switch sold separately.
Part# 169223G
more info
152022, MK-275 PROFILE WHL10 3/8 RAD
MK-275 PROFILE WHL10 3/8 RAD
MSRP: $527.00
Ruff N Tuff Tools Price: $421.60
SALE : $241.37

MK-275 PROFILE WHL10 3/8 RAD
Part# 152022
more info
159326 MK-RD100 10" GLASS BLADE
MK-RD100 10X062X5/8 GLASS BLADE
MSRP: $473.00
Ruff N Tuff Tools Price: $378.40
SALE : $216.63

(1)

MK-RD100 10" x .062" x 5/8" Supreme Resin bonded Glass Blade.
MK Diamonds BEST Glass cutting blade. Made specifically for cutting glass bottles and other glass materials where chipping must be kept to a minimum.
PART# 159326
more info
170666 $210.00 MK-315GL-XL 10X065X5/8 Free Shipping
MK-315GL-XL 10X065X5/8
MSRP: $425.00
Ruff N Tuff Tools Price: $340.00
SALE : $194.65

(1)

The MK Diamond's 315GL-XL 10" Glass Tile Blade is specifically designed glass tile blade for cutting glass and mosaic glass tiles . This blade is designed with a very fine diamond grit which consistently gives a smooth and chip-free results. The highest quality materials are used to ensure the best performance in glass cutting, providing straight and true cuts without chipping.
Part# 170666

more info
155954 5 Piece Cutting Kit MK Diamond
5 Piece Cutting Kit
MSRP: $200.00
Ruff N Tuff Tools Price: $180.00
SALE : $162.00

5 Piece Cutting Kit includes (Large Rip Guide, Dual 45 Flat angle guide, Protractor, 45 Degree Miter, Dressing Stone and handy black carrying case).
Buy the KIT and SAVE over buying them individually and get the carrying case included.
Part# 155954
more info
170665 $210.00 MK-315GL-XL 7X060X5/8 FREE SHIPPING
MK-315GL-XL 7X.060X5/8
MSRP: $298.00
Ruff N Tuff Tools Price: $238.40
SALE : $136.48

(1)

The MK Diamond's 315GL-XL 7" Glass Tile Blade is specifically designed glass tile blade for cutting glass and mosaic glass tiles . This blade is designed with a very fine diamond grit which consistently gives a smooth and chip-free results. The highest quality materials are used to ensure the best performance in glass cutting, providing straight and true cuts without chipping.
Part# 170665
more info
$100.00  158222-MK ASSY, SHAFT MK-101 W/BLADE LCK
ASSY, SHAFT MK-101 W/BLADE LCK
MSRP: $149.88
Ruff N Tuff Tools Price: $142.38
SALE : $135.00

ASSY, SHAFT MK-101 W/BLADE LCK KIT.
more info
151271-MK Water Pump 120V/60Hz O.E.M Tile saw Pump
120V/60Hz Electric Water Pump for 7" & 10" Tile saw
MSRP: $140.00
Ruff N Tuff Tools Price: $125.00
SALE : $120.00

(4)

Electric Water Pump for Tile & Brick Saws - 115V/60HZ.
*Includes 6' cord and 4' clear vinyl water tubing.
Part#151271-MK

more info
130203 MK-10 10" x .090" x 5/8"
MK-10 10" x .090" x 5/8"
MSRP: $173.00
Ruff N Tuff Tools Price: $138.40
SALE : $112.45

MK-10 10" x .090" x 5/8"Supreme blade for brick.
Part# 130203
more info
151271-VP 120V/60Hz Electric Water Pump
120V/60Hz Electric Water Pump for 7" & 10" Tile saw
MSRP: $120.00
Ruff N Tuff Tools Price: $114.00
SALE : $105.00

PUMP, WATER 115V/60HZ UL
Part# 151271-VP
more info
120V GFCI, 152610
120V GFCI, 152610
MSRP: $96.00
Ruff N Tuff Tools Price: $91.20
SALE : $86.40

(1)

CORD, GFCI 120V 15AM
Part# 152610
more info
162075 Side Extension table:MK-100 & MK-101series
Side Extension table: MK-100 & MK-101 series
MSRP: $72.00
Ruff N Tuff Tools Price: $68.40

Side Extension table:MK-100 & MK-101series
Part# 162075
more info
153201-MK Large 45 Degree Bullnose miter
Large 45 Degree Bullnose miter
MSRP: $67.00
Ruff N Tuff Tools Price: $63.65
SALE : $61.25

(1)

BULLNOSE, MITER, 45 LARGE
Part# 153201-MK
more info
   
 
Please "Click" on Picture Above for
More Details and Specifications