The 14" APC/H Handheld Air Powered Chop Saw is portable with a non-slip belt designed to improve power transfer. The APC/H has the benefits of an air motor with no performance loss when compared to conventionally powered competitors. This saw can be used indoors and in enclosed spaces without having to worry about exhaust fumes. Cuts up to 5-inches deep. The weight of the saw is precisely balanced for the operator in order to eliminate rocking of saw during cutting. This saw also has a built "at rest" stand. The adjustable guard will swing 90 degrees allowing a range cutting angles. This saw is ideal for concrete pile cutting, demolition and pipe cutting at below grade. An easy-to-read oiler is included for quick check of fluid levels by the operator.
*Optional water hose adaptor allows for wet cutting and not included with saw.
![]()
- No gasengine emissions – great for pile cutting and below grade applications
- Lowmaintenance, lightweight design
- Oilerincluded for a quick check of fluid level
- Applicationallows for dry or wet cutting, Constructed with a comfortable design forseamless cutting
- Air-powereddesign meaning no combustible parts
- Max cuttingdepth of 5″ with a minimum air requirement of 90 cfm at 90 psi.
- BladeCapacity 14” [Depth of cut 5”]
- Weight: 24lbs
- *Optionalwater hose adaptor allows for wet cutting and not included with saw - See Part# US60160
| Part# | 167989 |
Air Requirements
| 85 cfm of air at 80 psi
|
Blade Capacity
| 14" |
Depth of Cut (14" Blade)
| 5" |
| LxWxH | 37" x 9.5" x 19"
|
LxWxH (mm)
| 940 x 241 x 483
|
| Weight | 24lbs (11kg)
|
| Recommended Blade
585580801RNT |
![]()
![]()
Warning: This product can expose you to chemicals including nickel and crystalline silica, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
